10 Best 3d Printer Glass Bed 300x300 for 2025

RioRand

• 【Upgraded 3D Printers Glass Plate】:Creality upgraded carbon crystal tempered 3D Printers glass plate for CR-10 and CR-10S 3D printers
• 【High Quality Material】: Special Glass + microporous coatings.Anti-scratch, high hardness,not easy to be broken,surface flatness is less than 0.2mm
• 【Excellent Adhesion】: The Creality 3d glass plate was covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large models
• 【High-performance】: It Integrated with Heated Bed ,Super Flatness, Fast and uniform heating,and it is easy to clean with alcohol/water
• 【Durable add Reliability】: The special coating is inorganic and has a hardness of 7- 8 Mohs, and it is capable to work at 400ºC

ERYONE

• 1.Compatible with heated beds of all FDM 3D printers.
• 2.Filaments stick easily onto the surface of this build surface, easy to take off prints from upgraded magnetic flexible build surface and easy to clean up it.
• 3.High quality stainless steel - ensure flexible, easy to take off and clean up; High quality magnetic material - ensure the build surface compatible with all FDM 3D printers heated beds.
• 4.Magnetic material with pre-packed 3M adhesive, so it’s easy to get your bed perfectly flat before installing the upgrade magnetic flexible build surface.
• 5.Choose the correct size for your printer: 310x310x2MM, 235x235x2MM, 220x220x2MM, 165x165x2MM available.

SOOWAY

• This PEI sheet is Pre-applied with 3M 468MP Adhesive Transfer Tape for your convenience.
• ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry.
• REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling.
• Sheet can be easily cut down to desired size by scoring with a utility knife.
• Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results.

GO-3D PRINT

• Size: 250mm x 300mm x 3mm
• Tips: apply a light layer of hairspray or glue stick helps to protect the surface of the glass to avoid damage from some special materials
• Flat Polished Edge for safe to handle
• Good fit Qidi X-Max 3D Printer and all 3D Printers with 250mm x 300mm or bigger printbed.
• Designed by GO-3D Print in California

Eewolf

• 3D Printer Build Surface: Please note the auto sensor could not detect the build surface directly.
• HIGH QUALITY: easy to use and without bumps or bubbles
• Make it easier to adhere the filament to the heated bed when printing.
• Compatible with Filament PLA, PETG ect. (not ABS)
• Packing: 2* build surface included. 162g

Eewolf

• A+B parts with magnetic detachable (Easier to take off models, anti-warping)
• 3D Printer Build Surface: Please note the auto sensor could not detect the build surface directly.
• Make it easier to adhere the filament to the heated bed when printing.
• Compatible with Filament PLA, PETG ect. (not ABS)
• Packing: 1* build surface included. 300g/pc

PrecisionMaker

• High quality Borosilicate glass
• All glasses are atleast 2.5mm thick
• Provides Smooth surface to print
• Idea for 3D Printer Heated Bed

UEETEK

• 3D Printing Build Surface sticks to the 3D printer platforms and improves the molding accuracy of the filament.
• Build sheet adheres to a print bed to help the filament stick during printing and print without warping.
• Compatible with ABS, PLA, HIPS, PETG, TPE, nylon, PC and so on. Allow to print surface without additional adhesives or tape.
• Build sheet adheres to a print bed or heatbed to help the filament stick during printing and easy to clean and remove the printed part after that.
• Color: Black. Material: Composite material. Size: About 300mm x 300mm/11.8 x 11.8 inch.

Velleman

• material: clear tempered glass
• thickness: 0.12" (3mm)
• size: 8.46 x 8.46" (215x215mm)
• ensures a perfectly flat and level bed
• smoother finish of bottom layer

Aibecy

• ➤Upgrade Magnet Build Surface Plate, sized 235*235mm/ 9.25 *9.25in, suitable for Ender-3/Ender-3S/Ender-3 pro/CR20 and other FDM 3D printer heated beds.
• ➤Build surface comes with upper magnetic build surface and lower magnetic adhesive base, easy to use.
• ➤Simply stick the adhesive bottom plate onto the heat bed platform without edge warp, and no glue is needed, convenient to use.
• ➤Easy removal PLA and PLA-based materials from 3D printing platform, ensuring the bottom of your finished model delicate and no warping, and no need any scrapper.
• ➤Premium material, super flatness, fast and uniform heating, work at max. 70℃, and can be repeated usage for saving cost. 100% Creality original sticker, best accessory for your 3D printer.