10 Best 5015 Blower Fan 24v for 2025

WINSINN

• ✔️️High quality 5015 24V Fan, speed 6200 + -10% RPM
• ✔️️Rated voltage: DC 24V, Rated current: 0.1A
• ✔️️Power: 2.4W
• ✔️️️Noise: 27DBA
• ✔️️️Oil bearings, use time no more than 12 hours / day. The life expectancy is about 30,000 hours. Lubricating oil is required to maintain the bearing.

Vordas

• 【1】Size: 50X50X15mm
• 【2】3D Printer 12V DC 50mm Blow Radial Cooling Fan
• 【3】Revolution: 6500±10%RPM / Current Rating: 0.18A
• 【4】Wiring Length : 1m ; Noise: 25dBA
• 【5】Excellent for cooling heatsinks on hotends, prints, or other cooling needs

YOTINO

• 3 Pieces fan size: 50 x 50 x 15mm, with approx 20cm cable, 2 pin connection
• These small fans have good cool-to-cool properties, because they produce high airflow. Due to the compact design, they can easily be accommodated in the 3D printer.
• Bearing: plain bearing, Speed: 7000 rpm, Air flow: 18CFM (30,6m³ / hour)
• Supply voltage: 12 volts, Current: 0.23A, Power: 1.8W
• Lifespan: 30000 hours Noise level: 26 db (A) Weight: 23.6 g per piece

Gwisdom

• Brushless DC Blower Fan, DIY replacement extruder hotend parts for Prusa i3 MK3.
• Size: About 50x50x15mm/ 1.9x1.9x0.59". Cable Length: about 750mm/ 29.5". Rated Voltage: 5V, 0.35A
• Dual ball bearings 5015 Blower Fan - Quiet version
• High quality Dual ball bearings, More stable and Long life, suitable for continuous work. Use time can 24 hours / day. The life expectancy is about 60,000 hours. No maintenance required. But Lubricating oil can further reduce noise.
• Please Note: the fan has two sides, but the side with sticker must be always facing the hotend (not visible when the fan is mounted). Otherwise, the cooling won't work properly.

WINSINN

• ✔️️️High quality Dual ball bearings, More stable and Long life, suitable for continuous work. Use time can 24 hours / day. The life expectancy is about 60,000 hours. No maintenance required. But Lubricating oil can further reduce noise.
• ✔️️️Rated voltage: DC 12V, Rated current: 0.28A
• ✔️️️Wind speed: 7M/S, Wind volume: 10CFM
• ✔️️️Noise: 28DBA
• ✔️️️Made by WINSINN

UEETEK

• Color: Black. Pitch: 54.26mm. Power: 3.6W. Type: blowers, humidifiers.
• Bearings: Oil-bearing. Wind: 7.44CFM. Operation Voltage: DC 24V.
• Current Rating: 0.15A. Revolution: 3200 ± 10% R.P.M.
• Wind Speed: 3.5M / S. Noise: 30dBA.
• Excellent for cooling heatsinks on hot ends, prints, or other cooling needs.

Eewolf

• Package include: 1pc 50*50*15 extruder fan and 1pc 40*40*10 extruder fan. (The logos of the label page may be different)
• Each fan has 2 cables. If there is no terminal on the main board, you can cut the connectors off.
• 3D Printer Cooling Fan Extruder Blower Fan DC 24V (Wire length is 30cm)
• Great cooler for hot ends, extruder, prints & other parts on 3D printer.
• High rotation speed with low noise.

JYOPTO

• Made of high quality ABS material, the fan is very sturdy and durable. With high performance and low noise.
• These small fans have good cool-to-cool properties, because they produce high airflow.
• Due to the compact design, they can easily be accommodated in the 3D printer.
• Excellent for cooling heatsinks on hotends, prints, or other cooling needs.
• Ideal for RepRap, Rostock, Prusa Mendel, Huxley etc.

Eewolf

• Package include: 1pc 50*50*15 blower fan and 1pc 40*40*10 extruder fan.
• Each fan has 2 cables with connector. Wire length is 1M
• 3D Printer Cooling Fan Extruder Blower Fan DC 24V
• Great cooler for hot ends, extruder, prints & other parts on 3D printer.
• High rotation speed with low noise.

SIENOC

• Type : Cooling Fan
• Fan size: 50x50x15mm， Wire Length: approx.18cm
• Bearing: oil bearing， Speed: 5000r/min
• Voltage: 2pin DC 12V， Current: 0.13A
• Wind Volume: 18CFM