10 Best Argb Hub for 2025

Game Max

• The Game Max a RGB hub allows you to connect to six fans and allows the user to expand their cooling capabilities within your gaming PC, ultimately increasing the performance
• Take full control of your chassis’ lighting using the 3 pin Aura Sync connector included with the hub and sync to a compatible motherboard, ASUS, ASRock or MSI
• As well as been able to control your fans from your chassis using the built in PWM hub and 3 pin Aura connector, you can control your fan speed, LED speed or colour mode without any fuss using the RF (radio frequency) remote control
• Powered by a SATA connector ensures safe installation and you can be sure to have safe and reliable power for your Six connected fans
• Install the hub without screws for easy installation using the sticker included and it is easily movable should you wish to get the best cable management for your system

GAMEMAX

• The F15 is available in either a tempered glass or mesh option The tempered glass front panel enables the perfect blend between aesthetics and performance or the F15 is available with a full mesh front panel enabling direct airflow
• Motherboard Sync - You can now take your colour customisation to new levels with the included ARGB motherboard connector simply connect the 3 Pin to a compatible motherboard and you can use the mobo software to sync your fans the way you like
• ARGB Hub - The F15 comes with a hub included and can connect to 6 3 Pin or 4 Pin fans from the hub you can control the colour mode fan speed and LED speed The hub comes with an AURA and VDG connection Compatible with ASUS MSI and Gigabyte RGB Fusion
• RF Remote Controller - As well as been able to control your fans from your chassis using the built in hub and 3 Pin AURA connector you can control your fan speed LED speed or colour mode without any fuss using the RF (radio frequency) remote control Using the remote control gives you easy access to 5 pre-programmed colour modes and several different colour modes
• Water-Cooling Support - The front supports a 360mm radiator a 240mm radiator can be mounted at the top and on the PSU shroud and a 120mm at the back of the case

Akasa

• 1-to-4 RGB LED 4-Pin Splitter Cable
• Length: 10cm (without connector)
• Supports motherboard lighting control applications including MSI Mystic Light Sync, Gigabyte RGB Fusion Ready and As Rock RGB LED

EZDIY-FAB

• A best choice of two ways to control the RGB lighting system by Hub Controller or by ARGB SYNC Motherboard Software (Press Mode buttom for 3 seconds to SYNC)
• 16.8 Million Colors LED Design-Colorful lightning design with unlimited color transformation.
• Fan speed control- Dynamically control fan speed from 300 RPM to 1600 RPM to minimize noise or maximize airflow.
• High Performance- high airflow and large volume cooling by blade design ,Super silent
• Hydraulic bearing with longer service life to reduce noise and improve heat dissipation efficiency. Lifetime 30,000 Hrs

SilverStone Technology

• Supports up to 8 addressable RGB light strips or devices
• Compatible with addressable RGB controller or supported motherboard
• Supports light strips up to 5V 9A

EZDIY-FAB

• A best choice of two ways to control the RGB lighting system by Hub Controller or by ARGB SYNC Motherboard Software (Press Mode buttom for 3 seconds to SYNC)
• 16.8 Million Colors LED Design-Colorful lightning design with unlimited color transformation.
• Fan speed control- Dynamically control fan speed from 300 RPM to 1600 RPM to minimize noise or maximize airflow.
• High Performance- high airflow and large volume cooling by blade design ,Super silent
• Hydraulic bearing with longer service life to reduce noise and improve heat dissipation efficiency. Lifetime 30,000 Hrs

Thermaltake

• Manufactured with a stable SATA power input in mind, TT Sync Controller safely and reliably powers up to 9 addressable LED products.
• TT Sync Controller supports motherboards that have Aura Addressable Header (ASUS), Digital Pin Header (GIGABYTE) or JRAINBOW (MSI)
• 3 PWM signal cables and 2 mainboard signal bridge cables are included in the pack.

LeHang

• 1.This 3 pin RGB hub can extend any 5V addressable RGB products simultaneously, while only taking up one RGB header on your motherboard.
• 2. This hub is only compatible with 3pin 5V addressable RGB headers or controllers. not connect to 12V RGB components, making sure the arrows on connectors and headers line up.
• 3. Product Dimension: 88.6 x 45.6 x 18.8mm
• 4.RGB cable length: 100cm
• 5. Magnetic standoff design for easily fixing the hub in the chassis

Game Max

• The velocity fans are made using 24 LEDs and are dual sided with slim ring LEDs create a brighter look to the inside of your finished build and with complete PWM Control you can easily control your fan speed ranging from 500 to 1500rpm
• You can now take your LED colour of your fans and LED strip to new levels with the included a RGB motherboard connector, simply connect the 3pin header to your motherboard and you can use the miombo software to sync your LED strip the way you like and uniform your lighting
• Connect your fans and sync them using the included PWM hub, connect up to six fans (3 or 4 pin) and 6 3 pin Aura connections
• As well as been able to control your fans from your chassis using the built in PWM hub and 3 pin Aura connector, you can control your fan speed, LED speed or colour mode without any fuss using the RF (radio frequency) remote control
• The hub powered by a SATA connector ensures safe installation and you can be sure to have safe and reliable power for your connected devices
• Please note the unit dimensions shown are for the a RGB hub only

Corsair

• Six 4-pin Fan Ports with Voltage and PWM Control
• Dual Channel Lighting
• Two USB 2.0 Internal Headers
• Compatibility: Windows 10, Windows 8, Windows 7. Requires a motherboard with an internal USB 2.0 header. Requires CORSAIR LINK software version 4.7 or higher