10 Best Balco 3d Printer Nozzle for 2025

LUTER

• Premium Quality--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.
• Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle.
• Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
• Package Include--Printer nozzles come with 24 pieces MK8 nozzles in 7 sizes(quantity x output diameter): 2 x 0.2mm, 2 x 0.3mm, 12 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm,with a plastic box for storage.
• Parameter--Input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; Screw thread: M6;Hexagon diameter: 6 mm

WINSINN

• ✔️Nozzle Material: High Quality Hardened Steel, Ensure The Best Quality!
• ✔️The Nozzle is High Hardness -- Overall hardness: 50, Surface hardness: 55-60. More wear-resistant and has longer life.
• ✔️Because the nozzle is hardened, So it looks black, The coloration variance is normal and doesn’t affect function
• ✔️For 1.75mm Carbon fibre, Filled PLA, Glow-in-the-dark Filament
• ✔️About 0.4mm nozzle and needle can not pass, we hope everyone can understand. Because if the nozzle and needle are both accurate 0.4mm. They are impossible to pass. If the nozzle is accurate to 0.4mm, the needle must be smaller than 0.4mm. If the needle is accurate 0.4mm, the nozzle must be bigger 0.4mm.

Dawa

• The 3D printer nozzles are made of high quality brass material, sturdy and durable, connect with M6 out thread, easy to install
• Brass Material: The extruder brass nozzle print head is made of durable and solid brass material, not easy get rust or erosion, provide long serivice life.
• Multi-size Extruder Nozzle: It has 7 sizes (output diameter ), 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.
• The 3D print extruder is a good back up or emergenices when the nozzle clog,it produce consistent printing and no leak or clog, give you a smooth and clean printing.
• Applicability and compatibility: fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer

SIQUK

• Fine sizes assorted - 0.15 mm, 0.25 mm, 0.35mm, 0.4 mm and 0.5 mm cleaning needles not only suitable for most of sizes nozzle but also they can use for cleaning other small parts, such as throat and feeder gear
• Premium material - SIQUK 3D printer nozzle cleaners are made of premium stainless steel material, sturdy, durable and flexible, easy to twist
• Wide compatibility - compatible with most of 3D printers extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap
• Free gift - come with 2 different shape precision tweezers and 1 piece cleaning cloth, help you cleaning excess filament gear material and keep nozzles clean
• Package include - there are 30 pieces 3D printer nozzle cleaning needles in 5 different size, 2 pieces different sharpe precision tweezers and 1 piece cleaning cloth, totally 33 pieces nozzle cleaning kit

TecUnite

• Nozzle extruder measurement: the extruder has 5 sizes, 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm and 0.6 mm, different sizes can meet your multiple needs
• Matchable nozzle drill: this set of nozzle drill has matchable sizes with nozzle extruder, 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm and 0.6 mm, and they are held in a box, in case of missing or hurting
• Quality material: the nozzle extruder is made of brass, while the drill is made of stainless steel, not easy to get rust or erosion, providing long servicing life
• Wide range of compatibility: this set of printer nozzle kits is compatible with most 1.75 mm 3D printers on the market, such as Duplicator, MakerBot, RepRap, etc.
• Quantity: the package includes 10 pieces of MK8 nozzle extruder (5 sizes, 2 pieces in each size) and 5 pieces of nozzle drills in 5 sizes, applicable in your daily life

ANYCUBIC

• 45°chamfer design,much easier for filament feeding.
• Smooth mating face,effectively prevent filament from leaking.
• Nozzle diameter size was carved, easier to be identified.
• Pointed mouth,compatible with most 3d printer extruder The appearance of nozzle is bright.
• Package Include: 5* 0.4mm 3D printer nozzle.

Frienda

• 3D Printer extruder nozzle: totally 16 pieces 3D printer nozzles MK8 for Makerbot Creality CR-10, set of various sizes for convenient application
• Diameter: input diameter is 1.75 mm; 7 Different sizes of output diameter: 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm
• Type: extruder brass nozzle print head; Screw thread: external M6 thread connection; Hexagon diameter: 6 mm
• Good quality: made of brass, sturdy and durable; Attention: small parts, keep away from children
• Package include: 0.4 mm size (4 pack nozzles), while the sizes of 0.2 mm, 0.3 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm (2 pack nozzles each size), 16 pieces in total

SIQUK

• Package include: totally 22 pcs MK8 nozzles in 7 sizes, 2 x 0.2mm, 2 x 0.3mm, 10 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm
• Parameter: input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; out thread: M6
• Applicability and compatibility: fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer
• Premium material: the 3D printer nozzles are made of high quality brass material, sturdy and durable, connect with M6 out thread, easy to install
• Attention: small accessories, please keep away from children

LUTER

• Prime Quality--The 3D printer nozzles are made of high quality brass, the nozzle cleaning needles are made of premium stainless steel. Heavy duty and provide a long service life.
• 0.4mm Golden Nozzles--The extruder nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish. Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.
• Excellent Cleaning Needles--The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs.
• Useful Combination--The needles are designed for 0.4mm 3D printer nozzles including such as Makerbot Creality, CR-10, Ender 2, Ender 3, etc. The needles are also suitable for everything used as a nozzle.
• Package Include--20 x 0.4mm 3D printer nozzles, 5 x nozzle cleaning needles, 1 x transparent storage box

BIQU

• Bore diameter: 0.4mm
• Screw thread inner diameter: 1.75mm
• Height: 12.20mm
• Net weight: 2.5g/pcs
• Widely use for 1.75mm PLA ABS filament