10 Best Internal Door Router Jig for 2025

TREND

• With its tool free setup, the Trend Lock Jig is very fast to set to any door width from 34mm to 58mm wide The full length clamping plate ensures the jig remains rock solid in use and is secured with locking levers and twin clamping knobs.
• The set of 12 lock face plate and 4 lock case templates supplied are held in the Lock Jig with magnets for fast swapping, requiring just one router and cutter to do both the lock case mortice and the faceplate.
• The jig comes with a comprehensive laminated reference sheet with common lock model listed.For other locks, a secondary chart on the reverse side has info relating to faceplate and lock case sizes to quickly select the correct templates and achieve perfect results.
• Each template is stamped with a letter or number to indicate the locks it can be used with, 4 lettered plates for lock cases and 12 numbered plates for the faceplates simplifying and speeding up the selection process as well as eliminating costly errors.
• To rout the lock case mortice, a router with an 80mm plunge and fitted with a 30mm guide bush is required, along with a suitable 12mm diameter cutter with an overall length of 115mm to achieve the maximum mortice depth of 70mm.

TREND

• The ideal accessory for use with lock and hinge routing jigs when working on doors and ideally suited for shooting with planes as well as traditional hand fitting of locks and hinges.
• Perfect for internal and external doors from 32mm to 55mm and doors up to 58kg making it ideal for heavy fire doors for safe working.
• Rubber feet on the door stand allows it to be used on polished and laminated floors without worries of scratching the floor surface so it's ideal for refurbishment work in the home or business enviroment.
• The stand also acts as a pivot to allow safe lifting from horizontal to vertical when fitting or positioning to the door frame.
• Wide stabilising bar to stop the door from falling over and simple screw clamp with large clamping pad to protect the door face from damage.

Souber

• Quick Simple & Easy to set up
• Multiple Uses
• Cuts lock recess aswell as body
• All in Handy Carry Case

TREND

• Trend Hinge Jig Two Part In Case H/JIG/A
• Trend Corner Chisel HSS C/CHISEL
• Trend Two Flute Cutter 12mm Diameter TR12X1/4TC
• 4 x Apertures, 2 x Bradawls with spacer, 1 x 16mm guide bush, 1 x T-Handle hex key, 1 x 4mm spacing gauge, 1 x Fabric storage case

TREND

• Cam design with internal weight keeps the Door Lifter level and flat to the floor for easy deployment and operation.
• Slides under the door for easy foot control to lift and pivot the door to leave both hands free to align and position the hinge for placing the screws.
• Lifts up to 38mm high, ideal for positioning doors with higher floor clearance such as deep pile carpets or to lift up to remove or engage rising butt hinge pins.
• Solid, durable non marriing plastic to prevent damage to finished doors with hanging hole for storage.
• Cam design with internal weight keeps the Door Lifter level and flat to the floor for easy deployment and operation.
• Slides under the door for easy foot control to lift and pivot the door to leave both hands free to align and position the hinge for placing the screws.
• Lifts up to 38mm high, ideal for positioning doors with higher floor clearance such as deep pile carpets or to lift up to remove or engage rising butt hinge pins.
• Solid, durable non marring plastic to prevent damage to finished doors with hanging hole for storage.

Ryobi

• NO NEED FOR ANY OF YOUR SCREWS OR NAILS thanks to the integrated screw in clamp that will let this tool fit standard door thicknesses
• REMOVABLE PLASTIC INSERTS HELP VERSATILE MORTISING by allowing you to either cut rounded or squared pieces into your door
• 3 INCLUDED BITS WITH BUILT IN STORAGE (carbide hinge tip router bit, 1/8” bronze oxide drill bit, PH2/8-10SL double ended screwdriver bit) for routers and screwdrivers, so you can get to work on renovating your home right out of the package
• THE REMOVABLE FRONT GUIDE RAIL means that you can work with routers OR chisels of varying sizes
• WORKS FOR ALL STANDARD HINGE SIZES, including 5/8” and 1/4”

TREND

• Speedy to set up, the HINGE/JIG/A used the hinge as a template for length and backset, so that once set, the routed recesses are a perfect match every time, eliminating the time consuming method of marking up and transferring each position.
• The jig maximises productivity when fitting new doors into new frames or linings and is designed for all types including rebates and stops up to 25mm thick, covering domestic, commercial applications as a one stop solution.
• Hinges from 67mm to 127mm long with widths from 9.5mm to 35mm can be used with the jig using the same swift and repeatable set up making it very adaptable across a range of applications.
• With four hinge positions available, the jig can be used on doors with traditional two hinge and three hinge layouts for internal and external doors as well as heavy fire doors and doors in high traffic areas where a secondary top hinge is required.
• The two piece jig quickly assembles with just two screws to become a single, rigid jig, with any previous hinge settings retained for further use once stowed away in its carry case at the end of the day.

TREND

• A Jig to rout out apertures, recesses and radii in work tops to fit a range of sinks and hobs, and to suit curved cabinets.
• Will cut both an internal and external radiius with the use of either pins or engraved sight lines.
• Will cut a 90 degree angle, which when combined with the straight slot will allow a hob or sink aperture to be routed. Central slot allows cuts up to 820mm Long.
• Radius curves at 40mm, 60mm, 80mm, 100mm, 150mm and 250mm, and has external radii of 50mm, 100mm and 200mm
• Jig has a 45 degree end cut, Plus 26mm and 35mm cabinet door hinge recess facility.

TREND

• The Trend ANGLEFIX is the must have accessory for quick, accurate mitresaw setup when cutting mitres.
• Simple to use, the desired angle is taken by wrapping around the desired internal or external corner.
• The central metal tab automatically bisects the angle taken for fast setting without any measurements or additional tools.
• Ideal for setting mitre angles for skirting, architrave, dado rails, picture frames, moulding and more.
• Makes setting angles a breeze to speed up mitre work for trade and hobbyists alike.

TREND

• Perfect as a digital angle gauge when fitting skirtings and cornices, shelves into alcoves and many other uses, wherever an angle needs to be taken, the DAR/200 introduces new measuring options and is the digital angle finder that will step up to the plate and do the job.
• After checking an angle, the measurement can be quickly transferred to any tool such as a table saw or mitre saw to set and match the angle for a perfect fit every time, speeding up and simplifying any angled work.
• High accuracy is ensured with the precision etched stainless steel ruler blades and LED display registering in 0.1degree (one tenth of a degree) increments, and with the centre locking knob, settings can be firmly secured for referencing and transferring the angles.
• The zero-function button makes it quick and easy to take accurate angle measurements and makes additional setting out work simple to do.
• The DAR/200 is built to last to give years of accurate, repeatable performance across multiple platforms and comes supplied ready to use with a long life CR2032 3V battery and also has a built-in auto power off function after six minutes to conserve battery power.