10 Best Lumamu Stove Fan for 2025

LUMAMU

• 【Self-Powered & Eco-Friendly】SAVE MONEY ON ELECTRICITY! No electricity required. Works off the HEAT produced by your fireplace or wood-burning stove. The hotter the fire, the faster the blades turn. Therefore, more warm air gets dispersed throughout your house!Stove operating with normal surface temperatures between 122°F(50°C) and 662°F(350°C).[Energy Class A+++]
• 【Burn Less Fuels】Save your bill, more efficiency--- FULLY utilize the heat from your wood stove and disperse it to your room.The fan circulates warm air at a rate of 370 CFM(cubic feet per minute), and uses 31 % less wood. You can enjoy warmth in you room,increasing your comfort
• 【MAINTENANCE-FREE!】Just dust it off occasionally, and put some light oil on the blade shaft to keep it spinning smoothly and quietly! Say good-bye to the loud noise of electric forced-air fans! You won't even know this fan is there - but you'll FEEL the WARMTH! The working noise ≤25DB.
• 【Safty Design】---a bi-metallic safety device.The fan comes with a bi-metallic safety devicein the base of the fan.When the surface temperature rises above around 300℃, it will gently lift the front of the fan to protect the fan and motor. The fan will automatically recover normally as the surface temperature decreases.
• 【Lifetime Technical Support】 - Fully CE compliant; 12 months materials & workmanship guarantee.The frequently asked questions can be found on the USER GUIDE, if still any questions or complaints during uses, just contact us directly for solutions. LUMAMU always stand behind products.

LUMAMU

• 【Eco-Friendly and Heat-Powered】It is operated by the heat of stove. No need of batteries or electricity! Collecting the heat from your log burning fireplace,wood stove or pellet stove.Not only improved warm air circulation to warm around your house, but also reduce wastage of the wood and burning energy of your stove. It is effectively to save your money
• 【5 blades Design】It features twofold fan, which saving double energy. The 5 blades play a superposition effect, which reaches maximum at 1360RPM with air flow of 380CFM. The hot wind is more strong and concentrated than the normal.It operates with the sound less than 25dB. When you enjoy the warmth and comfort environment, you will never vex by the noise. Just quiet like whisper.
• 【Operation&Off Automatically】The operation Temp range is 65℃-340℃. It operates when the top of the stove reaches at 65 ℃ automatically. When the stove cools down below60℃ , it will stop working.It comes with a magnetic thermometer to monitor temperature.
• 【Fan Protection】The fan is made from aluminum, which will not easy to be rust or corroded. For TEG&motor, It is a protection shrapnel which protects them from damage of high temperature.For the whole fan, it features a inbuilt protection system to stop the fan overheating for expanding service life.
• 【Quality Service】If you have any trouble or puzzle with the fan, please feel free to contact us in anytime. It is 12 month warranty.

VonHaus

• IMPROVE THE PERFORMANCE OF YOUR STOVE – heat-powered stove fan increases the efficiency of your freestanding stove, oven or wood/log burner by effectively distributing heat
• NO POWER SOURCE REQUIRED – a thermoelectric module acts as a small generator to power the fan’s premium quality motor. No batteries or electricity required!
• SELF REGULATING – operates automatically according to the temperature in the room 160 - 190 CFM with self-regulating speed
• ENERGY SAVING – there’s no need to invest in additional heat sources or turn up the power on your stove, you can enhance the conditions with effective distribution alone
• DIMENSIONS – Extra-large design to make maximum impact – 22.5(H) x 19(L) x 9(W) – This product is only suitable for well insulated spaces or occasional use. Manufacturer 2 Year Warranty Included

LUMAMU

• 【Healthy and Economical】No electricity or battery,powered by heat.Wood Stove Fan for Log Burning Fireplaces, gets power from the HEAT produced by your fireplace, wood-burning stove or pellet stove.Effectively dispersing warm air around your room
• 【Start automatically】Start work when the surface temperature under the fan reaches around 50 celsius (122 degree F). The operating temperature range is 50 (122 degrees Fahrenheit) to 340 (644 degrees Fahrenheit) Celsius. The higher the furnace temperature, the faster the blade rotates and slows down and stops when the furnace cools
• 【Save your bill, more efficiency】FULLY utilize the heat from your wood stove and disperse it to your room.The fan circulates warm air at a rate of 270 CFM(cubic feet per minute),max rate will reach 350CFM,and 33% of wood fuel cost saving. You can enjoy warmth in you room,increasing your comfort
• 【Safety design】A bi-metallic safety device.The fan comes with a bi-metallic safety devicein the base of the fan.When the surface temperature rises above around 250 degree celsius, it will gently lift the front of the fan to protect the TEG and motor. The fan will automatically recover normally as the surface temperature decreases
• 【Unique blade design】Working quietly,more air flow.Feature with the unique blades design,The stove fan can drive more warm air with silent work.No noise. You will enjoy the warm air in a quiet and comfortable environment

LUMAMU

• 【large air volume】:Dual motors with 8 blades heat powered wood stove fan making it the most efficient way to heat your room from your stove, widely used for wood burning stove, gas stove, pellet stove and more. The magnetic stove thermometer measures operating temperature to keep your stove safe.
• 【Start Automatically】: Upgrade 8 blades, diffuse warm air throughout the whole room. Just place the stove fan on a smooth flat surface of your stove top ,near the side or back of the stovepipe(at least 4" away from stovepipe). The hotter the base of the fan gets, the faster the fan turns, and the more air the fan circulates into the room.
• 【Eco-Friendly and Heat powered】:Recommended surface temperature is between 185F - 644F (85°C - 340°C), and turns most efficiently when the temperature reaches about 250°C-300°C. ( for wood stove fireplace fan).It will slow down and stop as the stove cools. Also come with a magnetic thermometer to monitor temperature.
• 【Overheating Protection】:The in-built bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the thermoelectric module.
• 【Virtually Silent in Operation】－Noise<25dB,don’t worry about disturbing others and enjoy a good life.The stove fan support is made with Anodized Aluminum, able to resist high temperature up to 340°C(644°F) , no deformation and no discoloration even after long time working under high temperature.

LUMAMU

• 【Must Have Fireplace Accessories】- Compact design! Mini compact size makes our stove fan easier to locate on the stove, even the embedded fireplace.widely used for wood burning stoves, gas stoves, pellet stoves, etc. Starting temperature: 60 -70° C.Recommended operating temperature: 200 ° C -300 ° C.
• 【SAVE MONEY ON ELECTRICITY】- No electricity required. The stove fan creates its own electricity from the heat produced by your stove.The hotter the fire, the faster the blades turn. Therefore, more warm air gets dispersed throughout your house!
• 【Longer Lifetime】－The stove fan support is made with Anodized Aluminum, able to resist high temperature up to 340°C(644°F) , no deformation and no discoloration even after long time working under high temperature.
• 【Whisper Quiet】－The only moving part is the blade assembly.You don't even know the stove fan is there,but you feel the warmth!You will enjoy the warm air in a quiet and comfortable environment.
• 【Inbuilt Protection System】－There is high temperature protection shrapnel at the bottom.If the surface temperature rises above around 482°F (250°C),the safety device gently elevates the front of the fan to protect the TEG and motor.

LUMAMU

• 【Eco-Friendly and Heat-Powered】It is operated by the heat of stove. No need of batteries or electricity! Collecting the heat from your log burning fireplace,wood stove or pellet stove.Not only improved warm air circulation to warm around your house, but also reduce wastage of the wood and burning energy of your stove. It is effectively to save your money.
• 【Bigger&Unique Backrest】In order to make the best effect, It design with a backrest rounding to support the bigger blades running stable. It can reaches at 1360RPM with air flow of 370CFM max. Enjoy the more warm air. But the noise is less than 25dB. When you enjoy the warmth and comfort environment, you will never vex by the noise. Just quiet like whisper.
• 【Operation Automatically】It operates when the surface of the stove reaches at 50 ℃ (122 ℉) automatically.The operation Temp range is 50℃-340℃(122℉-644℉). With the higher of temperature, It routes faster. When the stove cools down below 50℃ (122 ℉), it will stop working.
• 【Fan Protection】The whole fan is made from aluminum, which will not easy to be rust or corroded. For TEG&motor, It is a protection shrapnel which protects them from damage of high temperature.For the whole fan, it features a inbuilt protection system to stop the fan overheating for long service time.
• 【Quality Service】If you have any trouble or puzzle with the fan, please feel free to contact us in anytime. It is 12 month warranty.

LUMAMU

• 【Heat powered】Heat powered wood stove fans generate power by converting the heat from stove into electricity, electricity generating units convert the heat energy into kinetic energy to drive the motor, then the blades spin.No batteries or electricity required, environment-friendly
• 【Economy&Start automatically】Upgrade 8 blades,large air volume, diffuse warm air throughout the whole room. Just place the stove fan on a smooth flat surface of your stove top ,at least 4 inches near the side or back of the stovepipe. It will work when the stove surface hot
• 【Save your bill, more efficiency】FULLY utilize the heat from your wood stove and disperse it to your room.The hotter the base of the fan gets, the faster the fan turns, and the more air the fan circulates into the room. It will slow down and stop as the stove cools. max rate will reach 880CFM,and 31% of wood fuel cost saving. You can enjoy warmth in you room,increasing your comfort
• 【Safety design】A bi-metallic safety device.The fan comes with a bi-metallic safety devicein the base of the fan.When the surface temperature rises above around 250 degree celsius, it will gently lift the front of the fan to protect the TEG and motor. The fan will automatically recover normally as the surface temperature decreases
• 【Quality Assurance&Quiet operation】Warranty period: 12 months. No need to install it, you can use it when you receive it.Unique blade design, our stove fan uses without noise, and can bring more warm air, let you enjoy the warm air in a quiet and comfortable environment

LUMAMU

• 【No electricity or battery,powered by heat.Healthy and Economical】Wood stove fan for log burning fireplaces, gets power from the HEAT produced by your fireplace, wood-burning stove or pellet stove.Effectively dispersing warm air around your room
• 【Start automatically】Start work when the surface temperature under the fan reaches around 50 degree celcius(122 degree F),working with a temperature between 50(122 degree F) centigrade degree to 340(644 degree F) centigrade degree. The higher temperature of the stove, the faster the blades spin.Slow down and stop as the stove cools
• 【Save your bill, more efficiency】FULLY utilize the heat from your wood stove and disperse it to your room.The fan circulates warm air at a rate of 270 CFM(cubic feet per minute),max rate will reach 370 CFM,and uses 33 % less wood. You can enjoy warmth in you room,increasing your comfort
• 【Safety design】A bi-metallic safety device.The fan comes with a bi-metallic safety device in the base of the fan.When the surface temperature rises above around 250 degree celcius, it will gently lift the front of the fan to protect the TEG and motor. The fan will automatically recover normally as the surface temperature decreases
• 【Unique blade design】Working quietly,more air flow.Feature with the unique blades design,The stove fan can drive more warm air with silent work.No noise. You will enjoy the warm air in a quiet and comfortable environment

LUMAMU

• 【Healthy and Economical】No electricity or battery,powered by heat.Wood Stove Fan for Log Burning Fireplaces, gets power from the HEAT produced by your fireplace, wood-burning stove or pellet stove.Effectively dispersing warm air around your room
• 【Start automatically】Start work when the surface temperature under the fan reaches around 50 celsius (122 degree F). The operating temperature range is 50 (122 degrees Fahrenheit) to 340 (644 degrees Fahrenheit) Celsius. The higher the furnace temperature, the faster the blade rotates and slows down and stops when the furnace cools
• 【Save your bill, more efficiency】FULLY utilize the heat from your wood stove and disperse it to your room.The fan circulates warm air at a rate of 270 CFM(cubic feet per minute),max rate will reach 490CFM,and 38% of wood fuel cost saving. You can enjoy warmth in you room,increasing your comfort
• 【Safety design】A bi-metallic safety device.The fan comes with a bi-metallic safety devicein the base of the fan.When the surface temperature rises above around 250 degree celsius, it will gently lift the front of the fan to protect the TEG and motor. The fan will automatically recover normally as the surface temperature decreases
• 【Unique blade design】Working quietly,more air flow.Feature with the unique blades design,The stove fan can drive more warm air with silent work.No noise. You will enjoy the warm air in a quiet and comfortable environment