10 Best Router Curved Edge Guide for 2025

Milescraft

• Compatible with plunge and fixed base routers
• Straight edge has a maximum Travel of approximately 5-1/2″
• Large surface area for straight and curved edges for radial cuts
• Includes two non-marring mortising pins for cutting mortises into varying board thicknesses
• Clear 13″ offset base provides added stability during edge routing
• Edge guide, mortise pins, Bushing, centering pin

Merry Tools

• No Load Speed: 30000RPM
• Weight: 1.95KG
• Supplied with 6mm and 1/4" collet chucks
• Voltage: 220-240V
• Power: 550W

TREND

• Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials.
• Bearing guided classic round over detail for edge detailing on curved and straight work with additional bearing for quirked Ovolo detail option.
• 1/4in radius for matched imperial replication work, ideal for lighter round over and Ovolo detail or bullnosing on thinner stock.
• PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.
• 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices.

TREND

• Self guiding rebate cutter ideally suited to produce rebates, lap joints, tongues and rebated corners.
• Cutter supplied with four bearings to achieve four different rebate sizes. Four additional bearings are available to allow four alternative rebate depths.
• Bearing guided for straight or curved work for portable and stationary routers.
• Ultra durable Trend Dnamic carbide ensures optimum performance and lifespan in timber and abrasive wood based materials.
• 1/2in shank for use in bigger routers and heavier applications with 'K' mark shank to ensure safe working practices.

TREND

• 6.3mm diameter X 25mm cutting length bearing guided trimmer for bringing decorative laminates and veneers flush to an edge or for templating work.
• Bearing guide can be used with templates with 25mm cut length suitable for trimming work on standard sheet material stock, ideal for replicating components.
• Bottom bearing allows top mounted template and pattern work in a router table or bottom mounted templating in hand held routing applications.
• Ultra durable Trend Dnamic carbide ensures optimum performance and lifespan in timber and abrasive wood based materials.
• 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices.

TREND

• 12.7mm diameter X 50mm cutting depth; the essential cutter for routing post formed joints with worktop jigs in tops up to 40mm thick.
• Cut crisp and clean precision fit joints every time; especially suited for use on abrasive chipboard core laminate faced worktops.
• Bottom cut feature for plunge work including stopped grooving and morticing applications.
• PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.
• 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices.

TREND

• Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials.
• Bottom bearing guide for cutting rebates on curved and straight work with accuracy and ease.
• Supplied with two bearings for 11.1 and 12.7mm wide rebates for glazing and panel work.
• PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.
• 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices.

Bosch Home and Garden

• 15 pieces TC router set
• Bosch router bits have high quality tungsten-carbide cutters
• Optimised cutting geometry and a precision cut

VonHaus

• TOTAL CONTROL – 1600W motor with soft start function and variable speeds (6000-26000rpm) for smooth routing across every application
• BUILT FOR PRECISION – variable plunge depth up to 50mm with micro adjustment dial for precise woodwork
• ADAPTABLE – ½ inch and ¼ collets enable use with the most widely available router bits
• COMFORTABLE – ergonomic soft grip handle with on/off lock-on switch built-in for maximum ease of use
• SUPPLIED WITH ACCESSORIES – brush guides (template, circle and curved edge), spare carbon brushes and dust collection adapter included. 2 Year Manufacturer Warranty Included

TREND

• Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers.
• 12.7mm diameter X 9.5mm cutting depth shank mounted bearing guided trimmer. Ideally suited to flush trim laminate and veneer work.
• 1/4in shank for smaller routers and easy control for hand held trimming use on curved and straight edge work or to follow templates for shallow rebating.
• PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.
• 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices.