Solar LED Torch And Worklight By Proteam

The Solar LED Torch And Worklight has been designed by Proteam for use outdoors or in any outside building such as a shed or garage. The system is designed so the unit is left where needed to provide light, from either a fixed point or as a portable torch, while the solar panel is mounted on a wall or roof to take advantage of the maximum amount of sunlight/daylight.

The Solar LED Torch And Worklight comprises a compact amorphous solar cell measuring 11cm x 2.5cm x 15cm (4.3in x 1in x 5.9in) that is designed to be wall mounted (though may be placed onto a low area of roof of a shed), and a light/torch which comes with a charging bracket which is 6cm x 23.5cm (2.4in x 9.3in). The light has been designed to be used either in its charging bracket as a fixed light, or to be removed and used as a torch. To aid this the light has 10 LEDs positioned to provide a fixed light and a further 3 positioned for use as a conventional torch light.

The solar panel charges the 3  600mAh AAA  Ni-MH rechargeable batteries within the light when the light is in the charging bracket. If the light is being used as a torch you will need to remember to place it back into the charging bracket to guarantee the torch will provide you with light. When fully charged the light should provide you with 5 hours of lighting either from the fixed light or from the torch light.

The Solar LED Torch And Worklight also comes with 3 metres of cable to allow you to place the solar panel in an ideal spot for providing sufficient sunlight/daylight for charging while placing the charging bracket and light in a position required for ease of use. The light has a dim LED to illuminate the on/off switch to aid using the device in dark locations.

The Solar LED torch is available for £24.99 plus delivery.